prolific usb to serial comm port wont open in putty

(powered - but all failed & no IP address provisioned) Then tried with the LAN port's cable connected to: This is how it's connected for anyone interested/ following along. See further on for correct colour coded wiring This is how I wired it up - dodgy + not secure with electrical tape.

The 3-pin does plug into the camera's port (see attached pictures). seller is in HK so not able to go back for any claims So I'm wondering - is there anything I can do to get the camera working again? after speaking on the phone with Hikvision apparently they won't even answer 1 basic question on this Now if I'm honest I bought this camera off a seller in HK - so it's a grey market import into the UK. Reset button on camera doesn't do anythingĬan't find the camera in SADP or any other interface. Tested the NVR's POE port with another camera.

so seems to be sending power but no data coming back but on the camera the red light is on + green light flickers only thing I changed was the password on my NVR but all other 7 cams (same model) still work fine Worked fine for about 1 month but in the last day decided to stop working properly. So I've got a Hikvision DS-2CD2742FWD-IS.

Prolific usb to serial comm port wont open in putty